If you have a site you think belongs in the list, please submit your site for consideration - we'll link to you, in return for a reciprocal link. Click here for more information.
hydraulic oil testing
|
Techenomics International’s laboratories analyse hydraulic oils by ASTM D892, this is a method of quantifying foaming characteristics of lubricating oils. Foaming is a common problem in hydraulic systems and splash lubrication applications, in severe cases; the foam can leak out of the machine through breathers and dipsticks. Fluids with foaming problems have a reduced cooling capacity which may contribute to overheating issues and accelerate oil degradation. The presence of foam in the fluid can lead to excessive oxidation and cavitation, the reduction of lubricating properties of the oil and performance of hydraulic systems. Foam tendency and foam stability can both be measured via ASTM D892, Foam tendency describes the amount of foam generated immediately after the fluid is aerated, the foam stability quantifies the amount of foam remaining 10 minutes after stopping of aeration. Troubleshooting Foaming issues can be a challenging process, but Techenomics can help by a process of elimination, you should be able to then identify and correct the root cause. Techenomics can offer a full suite of laboratory testing to monitor the fluid in your hydraulic system. We offer analysis of:
Having problems with Hydraulic Oil?Many companies are experiencing problem with their Hydraulics oils due to either antioxidant depletion or foaming of the oil , these can lead to Hydraulic system failures or component failures. Antioxidants are vital to fluid integrity; a loss of antioxidants could result in sludge and deposit formation, filter blockages, oil thickening, and an increase in oil acidity. The antioxidants present in the additive package will significantly limit oil degradation from occurring but will be depleted in the process. Therefore, it is imperative to know the status of the antioxidants in oils being used in service. RULER® testing can inform you of any antioxidant depletion before it becomes a problem. Oil aeration and foaming in the Hydraulic oil can also lead to failures, air entrapment can cause pump cavitation, erratic operations, component wear, low oil pressure, reduced viscosity and oxidation. Fluids with foaming problems have a reduced cooling capacity which may contribute to overheating issues and accelerate oil degradation. The presence of foam in the fluid can lead to excessive oxidation and cavitation, the reduction of lubricating properties of the oil and performance of hydraulic systems, it is vital to equipment health to have foaming testing preformed on hydraulic oil samples. Click here for more information on our products and services... |
Techenomics-Foam Testing of Hydraulic Oil
Back to the link directory home page
|
Ace Industrial
Ace Industrial : Rapidtorc RTX - Hex Cassette Tool he RTX Hydraulic Torque multiplier offer extreme low clearance. Ring spanner style tool with a radius similar to impact sockets. Torque can be applied to bolting you may have thought previously impossible. http://aceindustrial.com.au/
|
|
|
Custom Hydraulics Hydraulic
Custom Hydraulics Hydraulic Design, Troubleshooting, Analysis and Risk Assessments We have extensive experience in Hydraulic System design, used in conjunction with industry leading Simulation Software means that we can design and test your circuit before you build it. We have no preference for any manufacturer which means we will select to best equipment to suit you. When we design a circuit we can prepare your installation, commissioning, maintenance and training programs at the same time. http://customhydraulics.com.au/
|
|
|
Fluid Dynamics Engineering Pty Ltd
Mining Equipment and Supplies - Quick Couplings Hydraulic Couplings - Fluid Couplings - Shaft Coupling - Coupling Alignment Fluid Dynamics Engineering (NSW) Pty Ltd is proudly serving Australian mining, transport, grain, shipping and coal handling industries. We refurbish, service, overhaul, repair and test all the components in fluid couplings and drive units to considerably better condition than original manufacturer. http://fluiddynamicseng.com.au/
|
|
|
Fluid Test Connectors
Welcome to Fluid Test Connectors Australia and New Zealand, your local company providing quality hydraulic test points and test hoses at competitive prices. Please feel free to browse our website and contact us with any enquires http://fluidtestconnectors.com/
|
|
|
lubricants.s5.com
At the time of a motor oil or hydraulic oil change, a small sample of the used oil (50ml) is retained. The sample is sent to a laboratory for analysis. After the laboratory receives the sample, a series of tests are performed. The table below is a listing of each test, and the conditions detected by the test. All tests are not necessarily performed as each laboratory has an established series of tests. http://lubricants.s5.com/
|
|
|
Norman Andrews Automotive Repair Center
Norman Andrews, one stop vehicle repair shop, ring us now and save 02 4588 5777 This major service combines the extensive work of both the Safety Service and the Tune up service. Further to this we carry out an Auto-transmission service, or in case of manual transmission, a change of your gear oil and your vehicles differential oil/s. http://normanandrews.com.au/
|
|
|
Zoot-digital.com
,000 Hour Extended Drain Intervals Caterpillar is introducing a new hydraulic oil to the fluid product line, Cat® HYDOTM Advanced 10. This new oil is a combination of premium additives and specially selected and controlled higher quality base oils designed to provide extended drain intervals and extra protection to hydraulic system components. http://ns2.zoot-digital.com/
|
|
|
Origin Coal Seam Gas
At Origin, we’re happy to show you the facts about coal seam gas any time, so you can draw your own conclusions. We’re also regularly updating this website with answers to any new questions as they are raised. You’ll find all the latest facts in our Factsheets, in our Videos or in the FAQs section of this site. Check out our new press ads too. If there’s anything else you want answered, please phone us on 1800 526 369, or drop us an email. http://origintogether.com/
|
|
|
Price Farm Machinery
Price Farm Machinery - Mudgee offers a range of quality machinery and equipment for sale. Browse our range of new and used equipment and machinery online today to find that piece of machinery or equipment you need. http://pricefarm.industrysales.com.au/
|
|
|
Scintex Specialty Tools
Water in lubricating fluids can cause serious damage to machinery with premature failure of bearings, gears, pistons and other components. Major bearing manufacturers claim that as little as .05% water in the oil will reduce bearing life by as much as 60%. http://scintexspecialtytools.com.au/
|
|
|
StairCare
View a range of Staircare industrial, marine and mining industry projects. Hoisting Equipment Specialists Pty Ltd operates a 10 Ton Hydraulic Test Rig. The existing anti-slip tape was badly worn and due to hydraulic oil, solvents and other oil spillage slipping was of a major concern. http://staircare.com.au/
|
|
|
A1HE
* Repair and reseal * Cylinder/Ram Testing and certifying * Design and manufacture * Machining parts and components * Engineering * Hydraulic Cylinder sales * Fluid Power products * Boring and honing * Hoses and Fittings * Hydraulic Hose crimping http://www.a1hydraulics.com.au/
|
|
|
Advanced Fluid Systems, Inc
Hydraulic Fluid Services - Advanced Fluid Systems, Inc. Advanced Fluid Systems' hydraulic fluid services and products can help you reduce downtime and operating costs. Let us help you with the prevention, treatment and diagnosis of your hydraulic fluid. http://www.advancedfluidsystems.com/
|
|
|
Allied Heat Transfer
We have been supplying cooling equipment and advice to the hydraulics industry for over 10 years, we have a great knowledge and understanding of the special requirements faced by hydraulic systems. Our capabilities are not only in the supply of oil coolers from our extensive range of off the shelf products; we also have a highly skilled maintenance workshop, as well as a design team capable of providing tailor made solutions and custom packages. http://www.alliedheattransfer.com.au/
|
|
|
All Terrain Services
All Terrain Services can take care of all of your mobile crane and plant issues enabling you to concentrate on your core business, so that we can get you back on the job fast. http://www.allterrainservices.com.au/
|
|
|
A & P Hydraulics
A&P Hydraulics is a leading manufacturer of aviation hydraulic test equipment, specializing in aircraft hydraulic test stands and hydraulic power units, we understand the demands and needs of the modern aerospace maintenance industry, by providing the exact testing equipment required http://www.ap-hydraulics.com/
|
|
|
Aral-Lubricants.com
Active substances are added to base oils in order to achieve properties in the finished product, which are required for commercial lubrication. These additives are not already available in the base oil in order to still enhance positive properties or in order to eliminate unwanted properties or to at least suppress them. You can modify or improve properties through chemical and/or physical effect of lu-bricants, fuels, fuel oils etc. e.g. concerning oxidation stability, EP effect, foam formation, viscosity temperature behavior, solidifying point, liquidity, carburetor icing, intake system fouling, filtrability, ignition qualitys, knocking resistance etc. http://www.aral-lubricants.com/
|
|
|
Australian Pressure Laboratory
Australian Pressure Laboratory is a specialist NATA accredited laboratory providing dead-weight tester calibration, pressure calibrator and transducer calibration and pressure gauge calibration. Request a quote online today. http://www.auspressurelab.com.au/
|
|
|
Avtron Aerospace, Inc
Avtron’s Hydraulic Ground Support product line is designed to conveniently service both military and commercial aircraft systems world-wide. The Hydraulic Ground Support product line includes everything from diesel and electric standard military hydraulic mules to systems with fluid polishing units for commercial aircraft production complete with custom software. From manual operation to programmable logic controller (PLC) via a human machine interface (HMI). Operators can select from a wide range of flow and pressure ranges. http://www.avtronaero.com/
|
|
|
Bayliss Energy
The Logan Superior Energizer is designed to match a corresponding size of Logan Superior Hydraulic Fishing Jar. It is run in conjunction with the Fishing Jar to supply intensified impact during jarring action. http://www.baylissenergy.com/
|
|
|
BHA
BHA is an importer and distributor of many of the worlds leading hydraulic brands, across a wide range of product categories. Akon was founded in 1980 to manufacture hydraulic directional control valves. Since its inception the company have become a primary manufacturer of these valves worldwide. Akon produces high quality monoblock and sectional hydraulic valves, which are used in the mobile machinery industry (car transporters, refuse trucks, mobile cranes, sugar beet harvesters, agricultural tractors etc.) as well as the marine industry. http://www.bhaimports.com.au/
|
|
|
boschrexroth.com
Free seminar reviews CSA hydraulic power press safety regulations and steps required to produce and operate safety-compliant system. Course Detail - Canada - CSA Z142, hydraulic oil testing, hydraulic press safety, hydraulic press safety regulations, hydraulic press safety risk assessment, hydraulic press safety standards, industrial press safety, power press safety, press safety compliance http://www.boschrexroth.com/
|
|
|
boschrexroth-us.com
Free seminar reviews CSA hydraulic power press safety regulations and steps required to produce and operate safety-compliant system. Hydraulic Power Press Safety - Canada - CSA Z142, hydraulic oil testing, hydraulic press safety, hydraulic press safety regulations, hydraulic press safety risk assessment, hydraulic press safety standards, industrial press safety, power press safety, press safety compliance http://www.boschrexroth-us.com/
|
|
|
Citroen SM Australia
Citroen SM Australia and Peter McLeod - Restoring and converting the classic Maserati V6 powered Citroen SM for Right hand drive At SM Australia we are passionate about every SM we prepare for sale. Some cars are rebuilt totally regardless of cost for concourse display with many improvements, and others are prepared for daily use only. In all cases the same proven basic preparation procedures are strictly followed ensuring every car is a reliable and satisfying performer and a credit to the marque, with all known items of concern suitably addressed. Each car is extensively workshopped and road-tested by the principals of SM Australia to ensure a consistently high standard in both performance and presentation is maintained http://www.citroensmaustralia.com/
|
|
|
DSI-LTD : DSI Oil Test Kits
A specialized series of unique on-site test kits for Leak Detection, optimization Grease Flow of hose reel and hand gun greasing systems, Hydraulic Particle inspection and classification, Lubrication Fundamentals training, and others. http://www.dsi-ltd.com/
|
|
|
Eaton
Eaton hydraulic components have a global reputation for quality, reliability and performance. That reputation is built on a tradition of customer service and we stand behind every one of our products. Our Fluid Analysis Service follows that same tradition. We provide our customers with comprehensive fluid testing and diagnostic services, with detailed reports that are easy to understand. http://www.eaton.com/
|
|
|
ECEFast
ECEFast supplier of all Industrial Instrumentation, NATA calibration and service, Temperature Manufacturing, servicing in Australia and New Zealand ECEFast is one of Australia’s largest manufacturers and suppliers of sensors and industrial instruments. We currently have direct manufacturer access to over 15,000 products and are the number one supplier of infrared temperature measurement equipment in Australia. http://www.ecefast.com.au/
|
|
|
Excel Hydraulics
Excel hydraulics specialise in Hydraulic Components, Rams and Parker Hannifin sales and maintenance http://www.excel.com.au/
|
|
|
Cummins Filtration
Cummins Filtration offers an extensive line of hydraulic filtration products for medium and low-duty applications. Our commitment to technology helps keep you going. We offer an extensive line of hydraulic filtration products for medium and low-duty applications. We also offer a comprehensive replacement hydraulic filter line for many competitive filter part numbers. Through the right choice of filter media, our Cummins Filtration brand hydraulic filtration products achieve higher efficiency and dust capacity with lower pressure-drop characteristics than the competition. This prolongs component life, which saves you money in the long run. The proper oil-cleanliness level for critical clearances on components in the hydraulic fluid stream is the key. Our state-of-the-art facilities enable us to perform multi-pass, pressure-drop, flow-fatigue and hydrostatic burst testing. http://www.fleetguard.com/
|
|
|
Hedland and Flo-tech
Hedland manufactures over 7,000 different variable area flow meters for oil, water, air and other liquids and gases. In addition to variable area flow measurement, Hedland offers turbine flow meters for hydraulic fluids, turbines for water, and positive displacement flow meters for high-viscosity fluids. http://www.flo-tech.com/
|
|
|
The International Fluid Power Society Of Australia (Inc)
International Fluid Power Society Publications. General Publications. Fluid Power Study Guides In Printed & CD-ROM Formats. If you would like to order one of the above publications online please use the button below. Please enter the Order No. of the publication. Please add on the shipping charge when ordering publications. See below for shipping charges. http://www.fluidpowersociety.com.au/
|
|
|
FRAM Heavy Duty
Decrease the downtime and unplanned service... increase the uptime. FRAM® Heavy Duty Fluid Analysis is an integral part of your preventative maintenance program. The operating environment of today's commercial vehicles requires specialized monitoring to maintain peak efficiency. Stay in a "Fix before failure" mode with regular analysis with the FRAM® Heavy Duty Fluid Analysis Program. FRAM® Heavy Duty Fluid Analysis Program offers a single source for all your fluid analysis needs, quick and reliable turnaround (within 24 hours of sample receipt) on tests, and fax notification of out-of-spec or critical conditions. http://www.framheavyduty.com/
|
|
|
Fuel Treat Austrlia
Microbmonitor is a test kit that determines the level of fuel microbes in a variety of fuels, e.g., avgas, diesel. Microbial contamination has caused aircraft to abort take off, ships to be taken out of service and power generator bearings to fail. Contamination can, if detected early, be treated and severe operational problems can be avoided. Routine condition monitoring as part of a good housekeeping regime can significantly improve asset utilisation and reduce operational risks. Microbial contamination in fuels can cause: http://www.fueltreat.com/
|
|
|
Garnett Cross Hydraulic Courses
Garnett Cross Hydraulic Courses has an extensive list of industries to whom hydraulics has been taught. The client base of the company is over 990 companies, which include most of the Mining companies, Motor Car Manufacturers, Paper and Pulp Industries, Metal Industry, Shipping, Heavy Metals Industries, Forest Product Industries, Tyre Manufacturers, Major Hydraulic Companies, in fact most major companies in South Africa. http://www.garnettcross.com/
|
|
|
Gibbos Auto Spares
Gibbo's Auto Spares is the North Coast's premier supplier of car parts, auto spares, auto accessories and professional trade tools. Gibbo's Auto Spares are leading stockist of brands such as KYB, Kincrome, SupaTool, Fuchs, Lubrimaxx, Bendix and much, much more. With our stores located in Lismore, Casino, Kyogle, Ballina and Mullumbimby wand our new online store we are able to provide customers both locally and interstate with our great service and extensive range pf leading brand spare parts. http://www.gibbosauto.com/
|
|
|
GTS Gauges, Transmitters, Switches Pty Ltd
Your Number One Choice for Inductrial Instrumentation - Pressure, Temperature, Switch, Force, Flow, Level. Based in Perth, Western Australia, we ship worlwide all types of Instrumentation Technologies. Gauges, Transmiters, Switches, Load Cells, Flowmeters, Level Indicators, etc... http://www.gtsgauges.com.au/
|
|
|
Flo-tech
Hedland manufactures over 7,000 different variable area flow meters for oil, water, air and other liquids and gases. In addition to variable area flow measurement, Hedland offers turbine flow meters for hydraulic fluids, turbines for water, and positive displacement flow meters for high-viscosity fluids. http://www.hedland.com/
|
|
|
Hydraulics & Pneumatics
High pressure fluids or oil in hydraulic systems can be lethal if a fluid line connection point is opened or a hose failure occurs. The risk of workplaces injuries and recent fatalities in longwall scenarios related to contact with fluid under high pressure has only highlighted the dangers. High pressure fluids or oil in hydraulic systems can be lethal if a fluid line connection point is opened or a hose failure occurs. http://www.hydraulicspneumatics.com.au/
|
|
|
Hydro Safe Oil
Hydro Safe® Oil Division, Inc., incorporated in the State of Michigan , is a company dedicated to providing premium biodegradable, non-toxic hydraulic oils in grades ISO VG-32, ISO VG-46, and ISO VG-68. The company, working with highly regarded scientists in this particular field, formulated Hydro Safe® after careful and thorough research of the various applications in the markets targeted. At every step of the way, our goal was to provide the best biodegradable, non-toxic hydraulic oil available, and to market the product at very competitive prices, maintaining an efficient, low-overhead management system and to provide deliveries within ten days after receipt of order http://www.hydrosafe.com/
|
|
|
Hyleccontrols.com.au
When it comes to leak testing, functional testing, or assembly & test, simply selecting the lowest cost instruments from the shelf does not work. Customized test sensors, test-compatible fixture designs, expert systems integration, and an in-depth applications knowledge base on leak test and functional test requirements make a difference. That’s why InterTech’s proven technology is able to deliver unsurpassed savings in leak test and functional test cycle times, prototyping costs, time to market, and the best possible yields of products meeting high quality performance standards from assembly and test operations. http://www.hyleccontrols.com.au/
|
|
|
Fluid Power Society
The International Fluid Power Society (IFPS) is a nonprofit professional organization of individuals dedicated to enhancing the quality of certifications, educational opportunities, technology evolution, and professionalism within the fluid power and motion control industry. The IFPS was started in Detroit, Michigan, in 1960 by a group of 30 professionals interested in supporting the future of the fluid power industry and the ever-changing technologies involved.Today, our membership boasts nearly 4,000. http://www.ifps.org/
|
|
|
Oil & Gas Valves
Valves repair parts service water valves. Valves water repair. Just Valves supplies engineered valves and Steam Traps to the oil and gas industry. Our valves belong to the most reliable, easy repairable and service friendly on the market. Today, our extensive range of Gate, Globe, Check, Ball and Butterfly Valves are installed in a broad range of the oil and gas industry's toughest applications, from complete valve packages for terminals and carriers, to four way ball valve packages. Just Valves holds all major industry approvals, and is the supplier of choice for many of the world's major oil & gas companies. http://www.justvalves.com.au/
|
|
|
Lawler Manufacturing Corperation
Model 377-4 Hydraulic Oil Filterability Apparatus is a four (4) position, fully automated analyzer conforming to the French AFNOR NF E 48-690, NF E 48-691, IP448, and ISO 13357 test methods. Each of the 4 positions is independently controlled by a single PC (not supplied) using Windows 9X / 2000 / ME / XP PC based software. The proprietary software records the applied pressure, the first fluid drop collected, the level of fluid collected over time, and the temperature of the filtered sample. Data is stored up to the capacity of the hard drive and may be retrieved for spread sheet analysis, etc. http://www.lawlercorp.com/
|
|
|
LEDA
This pump can provide up to 10,000 psi using distilled water or mineral-based hydraulic oil. The pump is operated by pumping several strokes to prime the system, then switching to high pressure mode when the resistance increases. An integral pressure adjustment vernier knob varies the pressurized volume by 0.6 cc. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume, the vernier provided 150-3,000 psi (at 150 psi nominal) and 3,000-10,000 psi (at 3,000 psi nominal) adjustment ranges. With a minimum volume and no pressure applied, the vernier can also be used to provide a 0 to 1.7 psi range. Larger volumes will provide a smaller range of adjustment, but greater resolution. http://www.ledaelectronics.com.au/
|
|
|
Lube Assist
Before describing the Hydrocracking process and comparing it to the Solvent Refining process, we will first review the general principles of lubricant base oil manufacture. Lubricant base oils are produced in a series of steps, which are designed to enhance certain desirable properties. These include viscosity index, oxidation resistance, thermal stability and low temperature fluidity. http://www.lubeassist.com.au/
|
|
|
machineryhouse.com.au
Hare & Forbes Machineryhouse have been supplying NEW & USED Workshop & Engineering Equipment since 1930. Foundation principles have not changed to this date - to offer one of Australia's most extensive ranges of workshop machinery and machine tool accessories, at the best possible price. Currently we are one of the largest stockists and suppliers of machine tools, sheet metal and fabrication equipment in Australia. We aim to serve all machinery needs throughout Australia. With our head office and warehouse located in Sydney, and supply branches and agencies in all major capitals. http://www.machineryhouse.com.au/
|
|
|
Major Engineering Group
Major Engineering, since 1912, has been providing innovative engineering product and service solutions in the fields of thermal processing, refractory, fluid power technology and equipment safety. Major can provide standard products or products specifically engineered to your requirements. http://www.majoreng.com.au/
|
|
|
Mobil Fuel Services
McDonald Murphy Mobil Fuel Services We have a number of Lubes Centres available at Carmila, Bloomsbury, Moranbah, Proserpine and Clermont. We are very involved with bulk oil to Car Franchises, Large Industrial Equipment, Truck Workshops, Mining, Earthmoving etc. Our offices stock a large variety of packaged lubricants, other products and retail STM lubrication equipment. http://www.mcdonaldmurphy.com.au/
|
|
|
Yamaha WR450F 2-Trac
Yamaha France flew just a handful of journalists to Laayoune, in Southern Morocco to test the 2-Trac on part of the course of the Shamrock Rally, where they already had two works 2-Trac machines competing in the week-long event. Four of us had two days sharing two 2-trac machines and two conventionally driven WR450s, swapping between them at will. All four machines had the full complement of Ohlins equipment, so we were able to make a fair assessment of the pros and cons of two wheel drive in a whole variety of conditions, from huge soft dunes to salt lakes and ‘flat-out’ but stony desert with plenty of treacherous rocks hidden by the scrub and sand. We covered a full lap of the rally course on each of the two days, some 400kms in all, with extra excursions into the dunes for photographs and 1WD vs 2WD comparisons. http://www.mcnews.com.au/
|
|
|
Millipore
Fuel Monitoring, Hydraulic Fluids Monitoring and Machined Parts - The machines that keep global industries running need clean parts, fuel and hydraulic fluids that are free of particles and other contamination. The machines that keep global industries running need clean parts, fuel and hydraulic fluids that are free of particles and other contamination. For years, Millipore has provided reliable, sensitive field sampling kits and contamination tests that have become industry standards. Depend on Millipore to increase efficiency and lifespan of your complex http://www.millipore.com/
|
|
|
Coal Mining
The development of a non invasive hydraulic hose pressure tester is making for a safer work environment. The dangers that come with fluids under high pressures are well known. The risk of workplaces injuries and recent fatalities in longwall scenarios related to contact with fluid under high pressure has only highlighted the dangers. High pressure fluids or oil in hydraulic systems can be lethal if a fluid line connection point is opened or a hose failure occurs. http://www.miningcoal.com.au/
|
|
|
MISWA Chemicals
Miswa Chemicals is an internationally recognized manufacturer and exporter of automotive, POLYGARD brake and clutch fluids, KILIT Insecticide and pest control products, PAVAN homecare products, and much more. Visit our site to learn more of our products and becoming an importer. http://www.miswa.com/
|
|
|
Amsoil Synthetic Lubricants Hydraulic Oil
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern farm and industrial equipment. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations. Exceeds the performance requirements of virtually every piece of modern machinery. Provides exceptional lubrication to reduce wear, resist heat, protect against rust and extend fluid and equipment service life. Product Code: ATH http://www.mmbarberoilman.com/
|
|
|
New Farm Machinery
Tractor Test New Holland T7040 that is High in boost, low on juice, News and Reviews - New Farm Machinery Search Australia While the 100-155hp T6000 tractors may represent the mass-market mainstream for New Holland’s Basildon plant, there can be no doubt that the 167-225hp T7000 range is the factory’s crown jewel. Launched back at the tail end of 2006, much was expected of the T7000 when it first arrived on farm. So does the tractor deliver? Profi tested the 134kW/182hp T7040 model. http://www.newfarmmachinery.com.au/
|
|
|
National Fluid Power Assoication
The mission of the NFPA is to serve as a forum where all fluid power channel partners work together to advance fluid power technology, strengthen our industry, and foster our members’ success. Building on this foundation, we have identified three clear vision statements for the organization to pursue. They are designed to help build a stronger industry and to help our members build stronger companies. http://www.nfpa.com/
|
|
|
Nordon Cylinders
Nordon Hydraulics was founded by Norm Johnson on 13th October, 1972 at Geebung in Brisbane , Queensland . Mr. Johnson continues as one of the two working directors of the Company. After more than 30 Years in business, servicing the oil hydraulics industry as well as various Original Equipment Manufacturers, the Company still has the same strong commitment to Quality, Service and Customer Satisfaction. http://www.nordoncyl.com.au/
|
|
|
OEM
Manufacture Of Drives For Fluid Power, Diesel And Mobile Equipment Including Splined Hub, Coupling And Shaft, Stubweld, Flexible Coupling, Splined Yoke, Companion Flange, Drive Kits And Stub Shaft Kit For Diesel Engine, Overhung Load Adaptor And Hydraulic Pump Drive Gearbox http://www.oemdynamics.com.au/
|
|
|
Oemoffhighway.com
At Petroleum Technologies, we believe in a holistic approach to oil analysis. To us, it doesn’t make sense to only look at one 'slice' of what is really happening inside your equipment... which is why we’ve made it standard to include all necessary testing into one, complete bundle. It’s easy, accurate...and we’ve eliminated all the 'additional charges' to your invoices. http://www.oemoffhighway.com/
|
|
|
Petroleum Technologies Group L.L.C.
At Petroleum Technologies, we believe in a holistic approach to oil analysis. To us, it doesn’t make sense to only look at one 'slice' of what is really happening inside your equipment... which is why we’ve made it standard to include all necessary testing into one, complete bundle. It’s easy, accurate...and we’ve eliminated all the 'additional charges' to your invoices. http://www.oil-lab.com/
|
|
|
Petrotest® Instruments GmbH & Co. KG
Petrotest products are designed to monitor quality of mineral oil products such as:Crude oil, Liquefied Petroleum Gas, Liquid Fuels, Lubricating Oil and Grease, Bitumen. This test method covers the evaluation of the shear stability of an oil containing polymer in terms of the permanent loss in viscosity that results from irradiating a sample of the oil in a sonic oscillator. This test method can be useful in predicting the continuity of this property in an oil where no change is made in the base stock or the polymer. It is not intended that this test method serve to predict the performance of polymer-containing oils in service. http://www.petrotest.com/
|
|
|
Martel Electronics
The MECP10K Hydraulic Hand pump is a hydraulic Pressure Calibration test pump designed to measure High Pressure from 0 to 10,000 PSI. Buy Online. Hydraulic hand pumps from Martel are the perfect solution when you need high precision with the added benefit of portability. Used with mineral oil, light hydraulic fluid, or de-ionized water - our hydraulic hand pump can easily accomodate test hoses, gauges, and other fittings and be used wherever hydraulic pressure is needed. http://www.pressurepumponline.com/
|
|
|
FTI Progressive Power and Control
Hydraulic oil sampling and analysis from FTI Progressive Power and Control in Indianapolis, Indiana Progressive Power & Control provides hydraulic oil sampling and analysis from FTI. Dirty hydraulic fluid is the cause of many hydraulic failures and the early symptom of many hydraulic problems to come. Call Progressive Power & Control to have your hydraulic fluid sampled before dirty fluid causes downtime and the replacement of expensive hydraulic parts. http://www.progressivepower.net/
|
|
|
Ram Industries Inc.
Ram Industries is a quality manufacturer of cylinders of all kinds, including custom, agricultural, hydraulic, air, pneumatic, synchronizing, welded and telescopic. ISO 9001 certified, Ram Industries also has hydraulic equipment, lifts, loads and deals in areas such as CNC machining, cross tubes and induction hardened shafts. http://www.ramindustries.com/
|
|
|
The Bus Co
You are either in the "old-sk00l use what works" camp like folks who've relied on using single grade engine oils or the "it's a modern formula that's been improved" camp like the multi-grade folks. Whichever side you are on, you are probably looking for data to back up your position and it has brought you here. :-) The choice between using GL-4 vs. GL-5 in the manual transmission is at the heart of the debate (if you have an automatic, go ahead and use GL-5 because it's compatible). I'll state now that I recommend that you should use GL-4 in your VW Baywindow Bus. You might wonder why I've taken this position because I generally have modern viewpoints about available products and VW maintenance. It's simply because I've tried many gear oils and GL-4 works while the others have caused issues which I'll address below. http://www.ratwell.com/
|
|
|
Ross Brown Sales
Pneumatic and hydraulic pressure calibrators of the SIKA series PM and PC range distinguish themselves especially by high accuracy of measurement and company construction style. The calibrators are used in the field or laboratory, production and service for inspection or calibration of pressure sensors, gauges, pressure switches and bypass valves. Reference pressures of -1 up to 700 bar can be generated in a fast and simple way. Exact adjustment of the desired pressure is carried out by a precision adjustment valve The reference pressure is indicated via an analogue precision pressure gauge or a digital LCD Display. The instruments under test are connected to the pressure output of the calibrators by a pressure hose an an adapter. Compensation of the temperature influence in the range of -10...+15oC is carried out automatically. http://www.rossbrownsales.com.au/
|
|
|
Mining Safety
The development of a non invasive hydraulic hose pressure tester is making for a safer work environment. The dangers that come with fluids under high pressures are well known. The risk of workplaces injuries and recent fatalities in longwall scenarios related to contact with fluid under high pressure has only highlighted the dangers. High pressure fluids or oil in hydraulic systems can be lethal if a fluid line connection point is opened or a hose failure occurs. http://www.safemining.com.au/
|
|
|
Schroeder Industries
Viscosity is one of the most important properties of hydraulic fluid. Viscosity is the measure of how a fluid resists flow. Viscosity is dependent on temperature. Viscosity increases (fluid is thicker) as temperature decreases. The viscosity of the fluid must be selected for the overall working temperature range of the application. Some trade-offs in selecting viscosity are as follows: http://www.schroederindustries.com/
|
|
|
Silverline Marketing
Silverline Marketing: Manufacturer and exporter of industrial hydraulic jacks, automotive hydraulic jacks, brake fluid testers, antifreeze testers, hydraulic jacks, industrial antifreeze testers, brake testers, automotive brake fluid testers, heavy duty hydraulic jacks, mobile storage trolleys, mobile tool trolleys, table lifts, automatic hydraulic lifts, automotive post lifts, sidecars, tyre maintenance equipment, air power tools, automatic air drills, air ratchet wrenches, deep hole drilling machines, industrial reciprocating saw, oil dispensers, barrel mounted oil dispensers, india. http://www.silverlineequipments.com/
|
|
|
Sterling Filtration
The testing of hydraulic oil to measure its contamination level can be a beneficial task. A large number of hydraulic circuit failures and breakdowns can be attributed to poor filtration methods and oil contamination. By measuring the level of contamination you can make sure that the level of filtration that you are using is adequate for your needs and if not what needs readjusting to correct your problem. Sterling Filtration Ltd can offer you a complete service, taking your sample and sending it for laboratory analysis, and compiling a complete report of the cleanliness level of your hydraulic oil. We can also offer you any improved filtration solutions should you require them. http://www.sterlingfiltration.co.uk/
|
|
|
SMT
Hydraulics testing and pneumatics testing services at Stork. The requirements for testing modern technology's military or commercial hydraulic/pneumatic components are increasingly complex and demanding. Stork EWT's experienced engineering staff creates customized solutions for your hydraulic/pneumatic applications, making use of our wide range of facilities and services. We have the expertise you require to solve your hydraulic test requirements quickly and cost-efficiently. Our experience is unique and qualifies us like few others in the industry. Test media can be air, water, oils, fuels, and synthetic seawater. http://www.storksmt.com/
|
|
|
Radiators Sunshine Coast
Car Radiators Coolum Sunshine Coast we repair and service all car, truck and marine radiators, we are also auto air conditioning specialists. Hi Tech have aimed at covering all aspects of heavy equipment. Heavy equipment is most definitely where trucking companies, mines, quarries and farming machinery make their money so Hi Tech strives to have the job in and out the door as fast as possible. Hi Tech cover all states in Australia and in some cases internationally with the insurance in place and high transporting knowledge to offer safe, reliable and fast service. We have a large range of excavator radiators and hydraulic oil coolers, completely reconditioned with warranty included and complete advice on how to properly install them. http://www.sunshine-coast-radiators.com.au/
|
|
|
Superior Air Parts
Superior Air Parts Pty Ltd offer complete engines and an extensive range of individual parts to cater for your every aviation need. They're industry leaders in providing new aftermarket replacement engines and owner-built engines for the experimental market. They're committed to providing the highest customer service and quality products at competitive prices. http://www.superiorairparts.com.au/
|
|
|
tepcoproducts.com
Environmentally safe oil spill products for cleanup of fuel spills, oil spills, and hydrocarbon spills on land, soil, and on water. Contact was made to our office in May/2007 regarding the wood base underneath an oil/kerosene furnace system which, upon removal, it was discovered that kerosene had leaked and was somewhat permeated, leaving an odor. With over-time saturation of the wood, we recommended multiple treatments. After use of our Terracap 3000/4000 kit, we received the following in a letter: http://www.tepcoproducts.com/
|
|
|
Tigerca
Tigercat builds wheel and track feller bunchers for thinning, selective cut and final fell applications. In addition to superior products, a great deal of Tigercat's success can be attributed to excellent factory support. It instilled confidence in a virtually unknown upstart company. http://www.tigercat.com/
|
|
|
Hydraulic Torque Multiplier
Hydraulic Torque Multiplier Tools manufactured USA, Hydraulic Torque Multipliers are compact light weight and powerfull. petrochemical oil gas applications. Rapidtorc is the answer. http://www.tjtools.com.au/
|
|
|
Toro
Since it's launch in the USA in 1914, The Toro Company has responded to growing customer needs, and over the years, the company has built a reputation on superior customer relationships and innovation and is a leader in every market it serves. The Toro Company helps customers care for and preserve the outdoor environment. Toro has a history of creating and maintaining landscapes that are green, healthy and safe, with a full range of superior, innovative and environmentally sound products, services and systems. http://www.toro.com.au/
|
|
|
Tronair
Tronair is your complete aviation Ground Support Equipment Headquarters manufacturing a broad line of quality aircraft ground support eqiupment for corporate business jets, turbo-props, and regional and commercial airlines. http://www.tronair.com/
|
|
|
Turbeq
Turbeq Australasia Pty Ltd, over 18 years of experience in the Gas Turbine Industry with a vast network of suppliers and parts. http://www.turbeq.com/
|
|
|
Usoilcheck.com
Used oil analysis is a scientific method for determining the condition of an oil and the condition of the system in which the oil was used. It is very similar to the analysis of blood in humans. Certain conditions present in oil can be directly traced to abnormalities in the lube system, just as blood tests detect physical illness. This science can be applied to any system that uses oil as a lubricant. Problems with engine, hydraulic, gear case, and compressor systems can all be diagnosed through used oil analysis. http://www.usoilcheck.com/
|
|
|
Valvoline-technology.com
Valvoline Technology develops innovative products to keep you on the frontier of automotive and motor oil intelligence. Our services include: product sample analysis, formulation development, quality control testing and monitoring, ongoing support through our hotline and much more. Valvoline Technology develops and delivers innovative solutions to our customers and consistently outperforms our peers. http://www.valvoline-technology.com/
|
|
|
XcelPlus
Xcelplus is a permanent metal treatment for your engine which reduces friction. It lasts over 100,000 kms in normal use. Improves economy while protecting your engine. Tested by independent labs, consumer and government agencies. Established in 1975. http://www.xcelplus.com.au/
|
|
|
Yet2.com
This bio-based polypropanediol (PPD) ester hydraulic fluid technology is part of a new DuPont functional fluids technology based on bio-based 1,3 propanediol currently sourced from DuPont Tate and Lyle Bioproducts, Ltd. Low molecular weight PPD di-esters exhibited strong performance in hydraulic fluid screening and ASTM qualification tests against existing bio-based and MIL-PRF hydraulic fluids. DuPont seeks companies interested in licensing its technology to produce hydraulic fluids based on our PPD ester technology. http://www.yet2.com/
|